Inspection Plugs
Your system needs a new strategy,
Use Inspection Plug Strategies!
Features of
Inspection Plug Strategies’ Plug:
-
No expensive installation tools required
-
No screws, "O" Rings, or silicone sealer needed
-
Does not rely on friction fit to keep rubber
flange in place
-
No transition gasket required for
corrugated metal
-
Makes a positive water tight seal
Follow these simple steps for Installation:
 Tml Inspection Port Silicone
|
 |
The unique Patented System with Self-Sealing Flange and Cap
is available in the following materials |
50 Durometer EPDM Rubber:340 Degrees
Temperature Resistance: -67F to +340F
Tensile Strength: 2150 PSI
Elongation: 420%
UV and Ozone Resistance: EXCELLENT
Meets ASTM D470 D624 D2137 D865 D395 |
50 Durometer Silicone Rubber: 500 Degrees
Temperature Resistance: -130F to +500F
Tensile Strength: 870 PSI
Elongation: 250%
UV and Ozone Resistance: EXCELLENT
Meets ASTM D2000 SAE J200 GE507 E036 A19 B37 |
Descriptions |
 System II
EPDM Sealing Flange, EPDM Cap,
Stainless Steel attached lanyard.
Color: Black Flange and Cap.
 TML Inspection Port EPDM
One Piece: EPDM Sealing Flange, EPDM Cap
Color: Black
|
 System V
Silicone Sealing Flange, Silicone Cap,
Stainless Steel attached lanyard.
Color: Gray Flange and Cap.
 TML Inspection Port Silicone
One Piece: Silicone Sealing Flange, Silicone Cap
Color: Gray
 TMLX Inspectin Port NEW!
One Piece: Silicone Sealing Flange, Silicone Cap
Color: Gray
Depth: 10MM
Fits thin Aerogel type insulation as well as all other types of thicker insulation.
|
Sizes Offered |
System II and V
Plug Sizes: 1.5", 2.5" 3 .5", 5"
Outer Diameter (Size hole to cut): 1.5", 2.5" 3.5", 5.0"
Inner Diameter (Size of test area): .5” less than outer diameter
Insertion Depth: .75” |
TML EPDM and Silicone
Plug Sizes: 2.5", 3.0"
Sizes Offered TMLX Silicone
Plug Sizes: 3.0" |
All Manufactured in the USA!
